Particle and coalescence filter
model PC 1410 E in a stainless steel housing
- One body two filtermethodes
Separation of liquids - particle filter
- Less space is requirement horizontal mounting
- Self-cleaning via bypass connection
- Can be used up to 350 bar and 200°C
- Gas connections on the body sub frame
- “Easy-Filter-Change System” Simple change of filter element from the front side
It is not necessary to remove the screw connections
- To disconnect fittings is not necessary!
- Made in Germany 
- Certificates: 3.1 material quality certificate, ATEX 2014/34/EU, Helium leakage tested
 |
 |
Functional description:
The PC 1410 model is used in the gas processing during the process gas analytics. The horizontal installation position allows less space requirement. Thanks to different filter elements, gases/liquids can be filtered (particle filter function) or liquids/aerosols can be deposited (coalescence filter function). All the gas connections have been provided for this. The filter housing can be rotated by 360° such that all the connection variants of the gas inlets and gas outlets are possible. The filter element is exchanged in a very service-friendly manner from the front side of the filter. A fussy removal of the screw connections is no longer necessary as all the gas connections are located on the firmly mounted filter base. The filter element is blocked by a retaining screw and thus cannot fall out inadvertently. The possibility of connecting a bypass is provided.
Comparison of the traditional filter technology with the new SUN-Control-Analytik filter
Technical specifications:
| Scope of delivery: | Housing, retaining screw for filter element, O-ring FKM (Viton) assembly bracket (optional), filter element (optional) |
| Materials used: | Stainless steel type 1.4571, FKM (Viton), silicate glass (filter element), Duran glass (only D-models) |
| Wall mounting bracket (option): | Stainless steel type 1.4301 |
| Operating pressure: | 0 - 350 bar. With Duran glass, 0 - 5 bar (till +25°C), 0 - max. 4 bar (till +80°C) |
| Gas flow: | 0 - 1000 l air/h |
| Pressure drop at 100 l air/h: | approx. 5 mbar |
| Pressure drop at 200 l air/h: | approx. 10 mbar |
| Flow rate of the liquid: | 400 l water/h at 1 bar pressure |
| Flow rate of the liquid: | 500 l water/h at 2 bar pressure |
| Operating temperature: | - 20°C - +200°C (higher temperatures on request) |
| With Duran glass: | - 5°C - +80°C |
| Housing dimensions: | Diameter 60 mm, length 100 mm |
| Housing volume: | 35 ml |
| Effective filter area: | 70 cm2 |
| Gas connection 1: | ¼“ NPT inside thread (filter element exterior) |
| Gas connection 2: | ¼“ NPT inside thread (filter element interior) |
| Gas connection 3: | ¼“ NPT inside thread (filter element exterior) |
| Gas connection 4: | ¼“ NPT inside thread (filter element exterior) (G-thread upon request) |
| Assembly: | - Wall mounting using retaining bracket (optional) - Front panel mounting using retaining bracket (optional) |
| Gas explosion proof ATEX: | EX II 2G Ex h IIC Gb -20°C ≤ Ta ≤ +200°C attestation EPS 19 ATEX 2 178 U |
| Dust explosion proof ATEX: | EX II 2D Ex h IIIC Db -20°C ≤ Ta ≤ +200°C attestation EPS 19 ATEX 2 178 U |
| Helium leakage test: | 2 x 10-9 mbar I/s |
| Language operating instructions: | German and English (included in the scope of delivery) |
| Spanish, Italian, French, Russian upon request | |
| Certificates/attestations: |
3.1 material quality certificate, NACE-MR0175-98, certificate of conformity ATEX 2014/34/EU, Helium leakage test attestation |
For operation in potentially explosive ambience:
The products can be used in explosive ambience of Zone 1, Zone 2, Zone 21 und 22.
Allowed the explosion classes IIA, IIB und IIC.
The products have no self-heating during intended operation and can be used in dependency of the maximum permissible media temperature for gases of the temperature class T6.
Helium leakage test:
The product line has been subjected to a helium leak test. Single attestation on request.
SUNOX100-process
Oil and grease-free products for applications with 100% oxygen (on request)
Order numbers:
Filter housing with filter top made of stainless steel: 
| Article | Article number |
|---|---|
| Filter housing, material stainless steel 1.4571 (316 Ti), filter top made of stainless steel, with retaining screw for filter element, with O-ring made of FKM (Viton), without filter element, without assembly bracket | PC1410E |
| Filter housing, material stainless steel 1.4571 (316 Ti), filter top made of stainless steel, with retaining screw for filter element, with O-ring made of PTFE, without filter element, without assembly bracket | PC1410EORPTFE |
| Filter housing, material stainless steel 1.4571 (316 Ti), filter top made of stainless steel, with retaining screw for filter element, with O-ring made of FFKM, without filter element, without assembly bracket | PC1410EORFFKM |
| Filter housing material Hastelloy HC 22 or 1.4462-Super Duplex | on request |
Filter housing with filter top made of Duran glass: 
| Article | Article number |
|---|---|
| Filter housing, material stainless steel 1.4571 (316 Ti), with filter top made of Duran glass, with retaining screw for filter element, with O-ring made of FKM (Viton), without filter element, without assembly bracket | PC1410ED |
| Filter housing, material stainless steel 1.4571 (316 Ti), with filter top made of Duran glass, with retaining screw for filter element, with O-ring made of PTFE, without filter element, without assembly bracket | PC1410EDORPTFE |
| Filter housing, material stainless steel 1.4571 (316 Ti), with filter top made of Duran glass, with retaining screw for filter element, with O-ring made of FFKM, without filter element, without assembly bracket | PC1410EDORFFKM |
| Filter housing material Hastelloy HC 22 or 1.4462-Super Duplex | on request |
Note:
-The standard product is equipped with FKM O-rings. For additional information about O-rings, refer to “Informations”.
-PTFE O-rings for single use only
Note: The PC 1410 model has 4 gas connections. If only two are used e.g. when using the particle filter (GAS-IN and
GAS-OUT), two blind plugs will be required. If you additionally connect a bypass, only one blind plug is necessary in
that case.
Please adhere to this in your next order
Ordering aid: what do I need for a complete filter?
1. Filter housing
2. Filter element
3. Assembly bracket (you can also use your own system)
4. Blind plug (the filter housing has 4 connections)
Filter elements:
| Article | Article number |
|---|---|
| Set (5 units) of filter elements for particle filtration, Material borosilicate micro glass fibres, pore size 0.1 μm, deposition rate 99.999% | FEPPC1410 |
| Set (5 units) of filter elements for coalescence application (removal of oils and aerosoles) and particle filtration. Material borosilicate micro glass fibres, pore size 0.1 μm, deposition rate 99.999% | FECPC1410 |
| 1 unit of filter element for particle filtration, Material PTFE-porous, pore size 1 μm | FEPTFE1PC1410 |
| 1 unit of filter element for particle filtration, Material PTFE-porous, pore size 10 μm | FEPTFE10PC1410 |
| 1 unit of filter element for particle filtration, Material PTFE-porous, pore size 25 μm | FEPTFE25PC1410 |
| 1 unit of filter element for particle filtration, Material PTFE-porous, pore size 50 μm | FEPTFE50PC1410 |
| 1 unit of filter element for particle filtration, Material PTFE-porous, pore size 100 μm | FEPTFE100PC1410 |
| 1 unit of filter element for filtration of liquids made of stainless steel 1.4404 pore size 1 μm | FESS1PC1410 |
|
1 unit of filter element for filtration of liquids made of stainless steel 1.4404 pore size 10 μm |
FESS10PC1410 |
| 1 unit of filter element for filtration of liquids made of stainless steel 1.4404 pore size 25 μm | FESS25PC1410 |
Note: Further pore sizes on request.
Options and spare parts:
| Article | Article number |
|---|---|
| 1 unit of blind plug made of stainless steel, for locking the unused gas connection | VSPC1410 E |
| 1 unit of assembly bracket made of stainless steel 1.4571 for wall mounting | MONWIWAMOPC1410 |
| 1 unit of assembly bracket made of stainless steel 1.4571 for front panel installation | MONWIFROPPC1410 |
| Crash ring made of Plexiglas for Duran glass filter upper part | BSPC1410 |
| 1 unit of filter upper part made of Duran glass | FODGPC1410 |
| 1 unit of O-ring FKM (Viton) standard, color green | ORPC1410FKM |
| 1 unit of O-ring PTFE, color white | ORPC1410PTFE |
| 1 Stück O-Ring FFKM, color black | ORPC1410FFKM |
Note: The standard product is equipped with FKM O-rings
Options:
Assembly bracket made of stainless steel for wall mounting
Item number: MONWIWAMOPC1410
Assembly bracket made of stainless steel for front panel installation
Item number: MONWIFROPPC1410
Crash ring made of Plexiglas for Duran glass filter upper part
Item number: BSPC1410
- If the glass breaks, the crash ring offers personal protection
- Pressure relief above 360° gap between round component
PreviousPage (no previous) - NextPage (no next) - TOP
